Pricing

Clearview Fencing Cost in Pretoria (2026 Price Guide)

25 March 2026 · 5 min read

What Does Clearview Fencing Cost in Pretoria?

Clearview fencing in Pretoria typically costs about R1,200 to R1,700 per metre installed, depending on height, mesh and site conditions. High-security 358 mesh tends to sit at the top of that range or above it. It is one of the most effective high-security fences you can put up in Gauteng.

These are typical installed prices published by South African price guides, read November 2026 (3 published South African price guides), not a quote. With construction material costs rising steadily according to Stats SA, getting an accurate quote sooner rather than later is always a good idea. Below, we break down exactly what you can expect to pay.

Key Takeaways

  • Clearview fencing: R1,200 - R1,700 per metre installed; 358 mesh tends to sit at the top of the range or above it
  • Height, terrain, and access all affect the final price
  • Always get an on-site quote — online estimates are guidelines only

Clearview Fencing Price Table (2026)

Panel TypeHeightInstalled (per m)
Clearview (published range)All heightsR1,200 - R1,700
358 mesh1.8mQuote after site visit
358 mesh2.1mQuote after site visit
358 mesh2.4mQuote after site visit

Typical installed prices published by South African price guides, read November 2026 (3 published South African price guides). The sources do not say whether VAT is included or give consistent prices per height for 358 mesh, so height-specific prices come after a site visit.

What Does "358" Mean?

The number describes the mesh aperture size. 358 mesh has a 76.2mm x 12.7mm aperture (3 inches by half an inch) — the gaps are too small for fingers or toes to grip, which makes it very hard to climb. ClearVu, Cochrane's brand of this fence (Cochrane Global), is the best-known name, and other manufacturers make 358 panels too. It is the most popular choice for high-security boundaries.

Some panels are sold with wider openings than 358 and cost less, but they are easier to climb, so check the aperture on your quote. Read the clearview fencing service page for more on how a job runs.

Factors That Affect Clearview Fencing Cost

1. Fence Height

Taller fences require more material and larger posts set in deeper concrete foundations. A 2.4m fence costs roughly 20-30% more than a 1.8m installation of the same length.

2. Terrain and Soil Conditions

Rocky ground, clay soils, or steep slopes increase labour time and may require specialised equipment. Pretoria's red clay soil can be particularly challenging during dry winter months when the ground is hard-baked.

3. Access to the Site

If the installer cannot drive a vehicle close to the fence line, materials must be carried in by hand. This adds time and cost. Narrow passages between buildings or fences on steep embankments are typical examples.

4. Quantity and Run Length

Longer runs are more cost-effective per metre because the setup and mobilisation costs are spread over a greater distance. Projects over 100 metres typically qualify for volume discounts.

5. Extras and Add-Ons

Adding a cranked top, palisade-style anti-climb brackets, or integrating electric fencing along the top increases the total cost. Gates and access points, such as a matching clearview sliding or pedestrian gate, are priced separately.

How Does Clearview Compare to Other Fencing?

Clearview fencing sits in the mid-to-upper price range for security fencing in Pretoria. Palisade fencing is comparably priced (about R1,100 - R2,400/m) and can be cheaper at entry level, while wall-top electric fencing is more affordable still (about R120 - R280/m, plus the energiser and certificate of compliance) but serves a different purpose. For a detailed comparison, see our guide on palisade fencing.

Frequently Asked Questions

Can I supply my own clearview panels to save money?

Some installers will quote labour-only if you buy your own panels, so ask when the installer contacts you. Check whether the manufacturer's guarantee still applies when panels are bought and fitted separately.

How do deposits and payment work?

Payment terms are set by the installer who does the work, not by this website. Many installers ask for a deposit before ordering materials, so ask for the deposit, balance and any staged payments to be written on the quote before you accept.

How long does installation take?

A typical 50 to 80 metre residential installation takes 2 to 4 working days. Commercial projects with longer runs can take 1 to 3 weeks depending on complexity.

Get an Accurate Quote for Your Property

Online pricing guides give you a ballpark, but every property is different. The only way to get an accurate price for your clearview fencing project is a proper on-site assessment. Send us your enquiry and a local installer will arrange a free, no-obligation site visit and quote anywhere in Pretoria, including Centurion, Waterkloof, Midrand and Montana. We pass your enquiry to one local fencing company. It costs you nothing.

If you are weighing up different fencing types, our palisade vs clearview comparison guide breaks down the key differences to help you decide. Request a free quote on clearviewfencingpretoria.co.za and a local installer will contact you to arrange a site visit.

Keep Reading

Related Articles

Need a Fencing Quote?

Get a free, no-obligation site visit and quote from a local Pretoria fencing installer. We pass your enquiry to one local fencing company. It costs you nothing.

Request a Free Quote
CallSMSGet Quote